SC-1/KA2Air | 5.3x8 | CE-Level 2 - Shoulder, Elbow, Knee, Hip

Are you looking to upgrade your armor? Or, maybe you're looking to replace the useless foam that comes with many suits and pants?

Many suit manufacturers simply use comfort foam to pad out your back and limbs, which provides little to no actual protection. After all, their business is to sell you a nice suit, not armor!

This high-quality armor is European designed and manufactured (by SAS-TEC Germany), to provide maximum comfort as well as maximum protection.

This armor is lightweight and conforms to your anatomy for all-day wearability yet reacts immediately to disperse the force of even minor impacts away from the human body.

It is very lightweight and flexes and moves with the rider but lock into position to provide full-coverage protection.

Unlike many other types of commonly available motorcycle protection, our armor is multi-impact compliant. That means it remains fully functional even after repeated hits. There is no need to replace your armor after an unscheduled dismount unless it is significantly damaged. 

For armor installation instructions, please click here.

Q: What is Level 2 armor? 
A: Here’s the official answer: CE Level 2 limb armor conforms to CE Level 2 standard if the average transmitted force of nine tests is less than 20 kN for limb armor and 9kN for back armor.

Translated into everyday English, CE Level 2 armor dissipates force better than CE Level 1 .

Q: Do I need Level 2 Armor?
A: Truly it is a preference as to what level of protection you are looking for. For most street and dual sport riders riding safely and within the speed limit, CE Level 1 protection is sufficient. Companies still produce Level 1 armor and some are made with even the newest technologies. At Bohn Armor, we’ll be riding with the new Level 2 product as it is designed specifically for our garments to make them extremely comfortable, lighter, more ventilated and come with the latest technology. We feel that our newest iteration is our best yet!

Q: Is this like D3O®? Does it harden on impact?
A: D3O® is a non-Newtonian polymer which means that it is soft and malleable in a non-stressed state but it instantly hardens when sudden stress (impact) is applied.

The Bohn Level 2 Armor, on the other hand, features progressive absorption as demonstrated in Newton’s Third Law of Motion (for every action [force] in nature there is an equal and opposite reaction). That means the air that is embedded within the cells of the foam resists force in direct response to how much force it is being subjected to. This characteristic allows the armor to effectively dissipate force at both high and low-impact speeds.

Q: What is the average lifespan on the Level 2 Armor?
A: Depending on the amount of riding you do, as well as your individual riding conditions, the viscoelastic foam could potentially last up to ten years.

Also, keep in mind that armor technology improves greatly every few years so you should find that each new set you purchase is much further ahead in quality, fit, feel and technology from what you had before.

Q: How do I take care of the armor pieces? What’s the best way to store them when I’m not riding?
A: We recommend removing the armor from your Bohn gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and negatively affect the armor.

Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled. 

During the off-season, we recommend storing in a cool, dry place away from direct sunlight. It is always a good idea to give everything a thorough cleaning before storing it away and we also recommend not storing it in a rolled or folded position as that can cause undue stress on the armor, causing it to wear out quicker.

Q: Does it need to be replaced after a crash?
A: Bohn Level 2 Armor has long-lasting crash construction and is meant for repeat use. If you go down, merely inspect for visible damage. If the damage is significant then you will need to replace the armor piece(s), if it is simply scratched, you do not have to replace it, simply sand off any hard or sharp edges and continue to use.

Q: Will these fit in the Bohn gear that I already own?
A: The new Bohn Level 2 Armor pieces have been designed to fit within the existing pockets of your Bohn Armored Pants, Shirts and Shorts. They are universally sized so they are also compatible with most other brands of protective gear. 

Q: What side of the flexible flat armor goes against my body?
A: While your first instinct may be to insert the armor with the interlocking part away from you, it is actually designed to have the solid part as the outer surface. The channels between the polygon “nubs” allow for more airflow to the skin, which leads to a more comfortable ride overall.

Q. Can I use these protectors in the cold?
A. Yes you can. But you need to warm them to your body before you use them in the cold or they could crack and this is not warrantied. See information on next drop down below for care instructions for more information on this. 

Q: I am sensitive to latex. Is your armor safe for me to wear?
A: The comfort of our customers ranks second only to their safety. The Bohn Level 2 Armor is latex free. 

Cleaning:

We recommend removing the armor from your gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and negatively affect the armor.

Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled. 

Temperature:

We recommend storing and wearing your protectors in temperatures above <60 degrees. Extreme temperatures will not affect the effectiveness of the protector, but extreme cold in addition to stress on the protector can cause pieces to crack. 

A such, do not stress the protectors in cold weather conditions. For example, leaving pieces in a cold garage and then putting them on can cause armor with articulation to crack at the articulation points. 

Just use good judgment when wearing the protectors and do your best to keep them stored in temperatures above 60 degrees for the longest life. We also recommend that if the protectors are in temps <65 that you warm them against your body before bending or flexing them.

DO NOT use frozen protectors–bring them inside to warm up and then use.

Warranty:

Limb armor, like your helmet, has an expiration date typically 5-10 years from manufacture. Cracking of the armor pieces is not warrantied as this means one of two things.

1. The armor placement is incorrect on your body (see proper placement graphic below).
   or
2. It has been subjected to cold extreme temperatures and then bent or used while frozen or cold. These pieces will not crack or have issues if stored properly and worn in recommended temperatures and warmed against the body in cooler temps before using. However, if your protector is affected and you are confident that you have taken care of your protector, please give us a call.
   

***Please remember these are designed as motorcycle protective pieces. If you are using them for other sports and they crack or break, we would appreciate your honesty. Motorcycle protection does not move the same way as if you were to use these pieces in other sports. So please keep that in mind.

Cleaning:
We recommend removing the armor from your Bohn gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and negatively affect the armor.

Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled.

Temperature:
We recommend storing your protectors in temperatures above 60 degrees. Extreme temperatures will not affect the effectiveness of the protector, but extreme cold in addition to stress on the protector (ie. bending of the armor when cold) can cause the pieces to crack.

A such, do not stress the protectors in extremely cold weather conditions. (For example, leaving pieces in a cold garage and then putting them on can cause armor with articulation to crack at the articulation points.)

Just use good judgment when wearing the protectors and try your best to keep them against your warm body. DO NOT use frozen protectors–bring them inside to warm up and then use.

Warranty:
Limb armor, like your helmet, has an expiration date typically 5-10 years from manufacture.

If you have Bohn armor that is 5-10 years old and is "crumbling", you need to replace it. If only one piece is crumbling, the other pieces are sure to follow. This means your armor has expired and all pieces should be replaced as they were likely manufactured at the same time.

Cracking of Level 2 armor pieces is not warrantied as this means one of two things:

• The armor placement is incorrect on your body (see proper placement graphic below).
  OR
• It has been subjected to cold extreme temperatures and then bent or used while frozen or cold.

If your protector is affected and you are confident that you have taken care of your protector, please give us a call.

Installation

To install armor into Bohn Armor Products, please see individual product.

• When installing, armor can be squeezed to fit into pockets but the armor must be warmed to room temperature.
• Armor can be trimmed as needed.